Disinfecting CPAP/Auto/BiPAP Systems

1. Always wash your hands prior to handling any CPAP equipment.

2. Make  a  solution of 1  part of white vinegar to 3 parts of  water.

3. Remove the water chamber from the humidifier, breathing tube and mask.

Masks

Wash masks on a daily basis with warm water and mild detergents and soak in a white vinegar solution weekly. Allow the masks to air-dry before the next use.

Tubing/Hose

Wash tubing weekly with warm, mild soapy water. Rinse and then soak it in white vinegar solution weekly for 15-30 minutes. Rinse with water and allow it to hang upside down for air-drying. 

Water Chamber

Wash water chamber with warm, mild soapy water. Rinse and then soak it in white vinegar solution weekly for 15-30 minutes. Rinse with water and allow it to air-dry. 

Air Filters

(a) Disposable Filters: Do not wash and change as needed for 1-3 months.

(b) Non-disposable Filters: Wash weekly with mild soapy water. Rinse and air-dry before the next use. 

Replacing CPAP Accessories

Do not forget to replace the CPAP masks, tubing and air filters every 3-6 months to prevent any infections. Call us for supplies at (201) 660-7888.

Distilled Water

In order to prevent airway dryness, it is essential to fill up the water chamber with distilled water to the maximum level. Replace the distilled water before next use. Do not use tap water as it may contain white minerals and germs. 

Do Not Forget!

Note: If you are sick and using  breathing machine, you must clean all CPAP machine accessories every single day with  white vinegar solution until you are cleared from illness. This  is  an effective way of controlling  infections.

​

Cleaning Instructions for Nebulizers

1. Wash nebulizer cup and mouthpiece/mask with warm water and mild soap after each treatment and soak in a solution of 1 part white vinegar and 3 parts water for half an hour.

2. Change the filter every month.

​